90 Copper Ring Terminals

The 90 Copper Ring Terminals is mainly aimed at optimizing space layout and installation convenience. In some cases, if the cable needs to be bent first to reach the connection point, a straight-type connector may cause the cable to bend at the joint. This kind of bending may lead to the internal leads of the cable conducting electricity, affecting the conductivity or long-term conductivity. The connection point may become loose, especially when the cable is under tension or braking. 90 Copper Ring Terminals 90-degree elbow design enables the cable to transition naturally after connection, avoiding unnecessary bending, thus reducing stress and protecting the cable and the quickness of the connection.

Easyjoint Electric Co., Ltd. is one of the most professional 90 copper ring terminals manufacturers and suppliers in China. Welcome to buy customized 90 copper ring terminals made in China here from our factory. Contact us for free sample.

Brand	CKS
Terminal Type	Ring
Manufacturer Part Number	RNB90
Insulation Types	Non insulated
Insulation material	Non
Colour	Non
Contact plating	TIN
Contact material	99.9% Copper
Operating voltage	600V
Operating Temperature	-30°C to 120°C
Certification

In many application scenarios, such as automobile engine compartments, the interior of equipment, or power distribution cabinets, space is extremely limited. If traditional straight circular connectors are used, the cables will extend directly, which may take up excessive vertical space and make installation impossible in compact structural areas. This can also cause interference with surrounding components, leading to difficult installation or unstable connections. However, 90 Copper Ring Terminals the 90-degree elbow design allows the cable to extend along the direction of the bolt interface immediately after connection, greatly reducing the required installation space.

Solar Power

Charging Pile

Wind Power

Power Connection

IATF 16949

ISO 9001

Invent

UL standard laboratory was established in 2005, the product testing equipment are: microscope, Vickers hardness tester, spectrometer, electroplating thickness meter, turbine conductivity meter, pressure tester, salt spray tester, insulation tester, flame retardant test, UL standard tool pliers, inserting and pulling force tester, tension machine.